Pages

Disclaimer

I write tut's as a guide line to make tags. I'm in no way saying mine is the right way, just the way I make a tag.
There are many ways to do all tags. I am just sharing my view of making the tag's I make... If you have a better way of doing a certain step, then by all means use your way. After all it is your tag centered around my tut... I would appreciate an occasional comment telling me what you think of the Tag, Tut, Kit, ect... This way I know what everyone likes and can improve... Thanks for understanding...
Please do not add your name or other words to the snags I post on my blog
****** ****** TOU ****** ******

My FTU Items are pretty easy, if you snag please give a link back if you use this in any tutorial or on a forum If you download one of my templates please leave some love, I enjoy seeing what others make out of them too...If you use my FTU items and i'm not on your fourm plz pm me on facebook so I can see what you do with them.. I may not be active but it's a nice thing to see others using them..

I am now making Kits so please read the TOU in each kit…I do not allow FTU Clusters unless your a fourm I have given Written permission to

In Love and Darkness
LadyDragus

Jun 12, 2018

Night Shade


Night Shade

This tutorial is written in Corel X5, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit
By Freeks Creations
Called
Night Shade

You can find this in 2 of her stores
&

I am using a PTU tube
By
Alehandra Vanhek
You can find his tubes
Link to tube (you have had to pay in for this, or be a member of the exclusive club to purchase this tube) Alehandra Vanhek ~ Gorgeous Mermaid

I am using a FTU mask by
Miz Teeque’s (199)
You can find her mask’s

Open a 725x725 size tag
Take paper3 paste it then apply the mask, merge into one raster layer…
Take the moon pull it behind the mask, but pull it up to the left hand edge behind the mask…
Click on top layer
Tree c/p re-size by 77% pull to left hand edge of your mask, add a drop shadow
Vertical 5
Horizontal 3
Opacity 60
Blur 5
Color White
Clock c/p re-size by 30% pull to the upper right hand edge of your mask…
Cross c/p re-size by 47% pull to the far right  hand edge of the tag…
Take your full size tube c/p re-size her by 27% pull to the bottom of the tag…
Drink c/p re-size by 21% pull to sit by her hand on floor…
Books c/p re-size by 25% pull to sit on right of drink…
Poison c/p re-size by 25% pull to sit on the left of books…
Candle c/p re-size by 50% pull to the far right hand edge of your tube…
Branch c/p rotate 90° to the left re-size by 50% pull to sit on bottom of candle…
Flower2 c/p re-size by 29% pull to sit on right hand edge of books…
Hourglass c/p re-size by 47% pull to sit by candle…
Skull c/p re-size by 27% pull to sit on the right of hourglass…
Spider c/p pull it to the clock and let it hang off of it and the tree, and cross…
Add a new raster layer, for your credit and kit makers credit make sure you have a LIC# to use this tube…
Thank you for reading my tutorial
©LadyDragus~ 2018


Jun 8, 2018

Steam love


Steam Love

This tutorial is written in Corel X5, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…


I am using a Exclusive Kit
By Creative by Crys
IB-Martin Abel 46-2

This can only be found


I am using a PTU tube
By Fiodorova Maria
You can find her work

I am using a FTU mask
By Miz Teeques Mask (Miz-055)

Open a 725x725 size tag
Flood fill with paper5 apply Miz_055 mask Take your tube, and paste just under the mask layer, between the paper where just her face is showing inside of the mask( I’m using the full size for this step..
Merge that group into one raster and size it down by 90%...
Frame2 c/p re-size by 77% pull to put the mask in the middle of the frame…
Lights c/p re-size by 60% pull to the far right hand edge of your frame…
Gears1 c/p flip vertical, then mirror re-size by 71% pull to the upper left hand edge of the frame
Gears2 c/p flip vertical re-size by 49% pull to the lower left hand edge of your tag…
Metal bird c/p mirror re-size by 32% pull to sit on top of the lights…
Watch c/p re-size by 33% pull down to the lower left of your tag , but make it look like it is hanging on the gears2
Sparkles c/p re-size it by 60% pull to the upper left hand edge of your tag…
Flowers c/p re-size by 50% pull to the bottom of your frame, in the middle of your tag…
Hatters hat c/p re-size it by 23% pull to sit by clock on left side of tag…
Chains2 c/p re-size by 38% pull so hang on the hat…

Add a new raster layer for your copyright and credit information, make sure you have a LIC# to use this tube... 

Thank you for reading my tutorial 

©LadyDragus~ June 2018


Jun 6, 2018

Emo Lolita4 Show off tags



This kit is an Exclusive to 
Scraps & Co 

Here is another show off tag 
Both of the tubes I used in the tags are exclusive tubes

I also made tags for kit maker and a group banner 







Jun 5, 2018

Soxies World

Soxies World

This tutorial is written in Corel X5, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using the PTU kit
Soxies’ World
By Wicked Princess Scraps


I am using a PTU tube
By Max-13 Tulmes
You can find his work

I am using a FTU mask
By MizTeeques (117)

Open a 725x725 (size down at the end)
Frame1 c/p rotate it 90° to the right, re-size down by 64%...
Clouds c/p re-size by 53% pull to the upper right edge of your frame…
Tree c/p re-size by 55% pull to the lower inside left corner of the frame, the house will cover some of the tree up…
House c/p re-size by 47% pull to the bottom of your frame…
Grass c/p re-size by 55% pull to bottom of house…
Take your tube (standing works best) c/p I resized mine down by 44% pull to the right hand edge of frame, where it looks like her hand is leaning on the house…
Dog c/p re-size by 34% pull to sit on her left foot…
Bird c/p re-size by 24% pull to the upper left hand edge of the frame…
Coffee cup, c/p re-size by 20% pull to sit in front of doggie …
Bear c/p re-size by 30% pull to the far left of grass…
Laptop c/p re-size by 30% pull to sit in between the animals…
Game c/p re-size by 19% rotate 15° to the left pull to sit beside the laptop…
Books c/p re-size by 27% pull to sit by the coffee…
Candy c/p re-size by 27% pull to sit on top of books…
Click on bottom layer of your tag, re-size the canvas size to 700x700
Flood fill with paper1 apply the mask from above, or one of your choice.
Merge the layer into one raster add a sharpen more to the layer…
Click on top most layer of your tag add a new raster layer, for your copy right and credit to kit maker…
Thank you for reading my tutorial
©LadyDragus ~2018

Tag for mask maker 
Tag for Kit maker