Have fun

I write tut's as a guide line to make tags. I'm in no way saying mine is the right way, just the way I make a tag.

There are many ways to do all tags. I am just sharing my view of making the tag's I make... If you have a better way of doing a certain step, then by all means use your way. After all it is your tag centered around my tut... I would appreciate an occasional comment telling me what you think of the Tag, Tut, Kit, ect... This way I know what everyone likes and can improve... Thanks for understanding...

Please do not add your name or other words to the snags I post on my blog


In Love and Darkness

LadyDragus

Jan 16, 2019

Purple Wings

Purple Wings



This tutorial is written in Corel X5, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a PTU kit
By Creative Scraps by Crys

This can be found in most of her stores
&


I am using the PTU artwork of
Anna Marine


This tube can be found

Open a 725x725 size tag
Frame 4 c/p size down by 67%
E109 c/p size down by 39% pull to the right hand side of your tag…
Take the tube with wings mirror sit her on the stand, make her lean on the stand, and no size down at all..
E39 c/p flip vertical rotate 45°to the right size down by 70% pull to the left hand edge of your tag…
E111 c/p size down by 34% pull to sit under her hand on stand…
E112 c/p size down by 34% pull to the middle of white pillar…
E6 c/p size it down by 25% pull to the right hand edge of white pillar…
E8 c/p mirror size down by 28% pull to the left edge of white pillar…
E116 c/p size down by 27% pull to the bottom of white pillar…
E25 c/p size down by 35% pull to sit on the frame by green stem of flowers…
E23 c/p size down by 35% pull to the right of the mushroom..
E41 c/p size down by 35% pull to sit under mushroom…
E26 c/p size down by 25% pull to the right of the black swan…
E34 c/p size down by 25% put by the left side of the book…
E61 c/p size down by 25% pull to the upper left so it looks like it is  hanging on the center of frame…
E42 c/p leave as it falls on the tag..
Go to bottom layer of your tag… (Size the tag down to 700 x 700 pixels)
Paper 4 using your ellipse Tool draw a circle behind the frame, make sure to convert to a raster layer…
E53 c/p size down by 90% pull so it does not show up in the top of frame…
Click on top layer of your tag, make a new raster layer for your credits & Copyrights for the tube…

Thank you for reading my tutorial
©LadyDragus~ January ~2019


Jan 14, 2019

Love Notes


Love Notes


This tutorial is written in Corel X5, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a wonderful new kit
By Kizzed by Kelz , I got this as part of
The All Dolled Up Store CT team


You can find her kit in this store


I am using a PTU artist
Vadis

You can find this artists work


Open a 725x725 size tag (size down at the end)

E140 c/p size down by 65%
E31 c/p pull behind the frame size it down by 55% rotate 45° to the right crop off any of the heart showing in side of the upper right of your tag…
E101 c/p size down by 75% pull to the top most of your frame, clean off any that is showing outside of the frame, so it looks like they are hanging on the top of the frame…
E5 c/p size down by 45% pull to the upper left hand edge of your tag…
Take the tube we are using (or one of your choice sitting down) paste it size it down by 29% pull to the left hand edge of your tag…
E70 c/p size down by 21% pull to sit under her elbow…
E17 c/p size down by 21% pull to sit on left of letters..
E52 c/p size down by 22% pull to right of letters..
E43 c/p size down by 22% pull to right of perfume bottle..
E71 c/p size down by 22% pull to sit in front of lipstick…
E47 c/p size down by 22% pull to the right hand edge of your frame…
E42 c/p size down by22% pull to the left of box of rose's..
E112 c/p size down by 22% pull to sit on right hand side of black box…
E98 c/p size down by 17% pull this rose to sit in front of red roses on left side of your tag…
Click on bottom raster layer of your tag, using your Rectangle tool open paper 1 make a rectangle behind the frame, then convert into a raster layer…

Go to top most layer of your tag 

Tag for Kit Maker 


Jan 11, 2019

Putting on the Ritzz


Putting on the Ritzz



This tutorial is written in Corel X5, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…

I am using a tube by
Justice Howard
Called Stripes

He is Mystical Scraps Artist of the month this month
You can find his tubes


I am using a PTU kit
By Irish Princess Designs
Called Chirstmas Noir


You can find where she sell at

I am using a FTU mask by Rachel
Here (738) Rachels Designs

Open a 725x725 size tag (size down at the end)
E81 c/p size down by 70%
Take your tube size her down by 60% pull to the bottom inside of the frame…
E1 c/p pull to the bottom of the tube size it down by 80%...
E73 c/p size down by 43% pull to the lower left of your tag…
E54 c/p size down by 29% pull to the right of white leaves…
E20 c/p size down by 45% pull to the far left hand edge of your tag…
E17 c/p size down by 65% pull to sit on the lower left of the tag…
E31 c/p mirror size down by 45% pull to sit in front of black present…
E37 c/p mirror pull to the bottom of the black present..
E2 c/p size down by 14% pull to sit on the left edge of the tubes hat…
E35 c/p mirror rotate 45° to the right pull to the end of black branch...
E23 c/p size down by 25% pull to the middle of the tag…
Click on bottom layer
E40 c/p erase any on the inside of the frame…
Click on bottom layer of the tag, size the canvas or tag to 700x700 pixels in size
Flood fill the bottom layer of your tag with paper3 apply mask from above, merge into on group layer..
Click back on top most raster of your tag, add a new raster layer for your copyrights and credit to kit maker **Make sure you have a Valid LIC# to use this artwork***

Thank you for reading my tutorial
©LadyDragus~ January 2019

Tag for Mask maker 

Kit maker 


Jan 9, 2019

Wings of Blue


Wings of blue


This tutorial is written in Corel X5, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…


I am using a PTU kit
By Honored Scraps




She sells in many stores, but I am using this as part of the Creative Team for mystical Scraps Store

I am using an exclusive tube
From Pics For design
**you have to have an exclusive Membership to get this tube or have paid into it when it was a pre-paid tube***

I am using a FTU mask
By Rachel Designs (719)

Open a 725x725
Frame 04 c/p size down by 55%
E34 c/p size it  down by 55% pull to the inside top of the frame…
E59 c/p mirror size it down by 97% pull to the top most of your frame…
E3 c/p size it down by 35% pull to the middle of black bow…
Take the tube c/p size her down by 35% pull to the far left where her wing hangs outside of the frame…
E32 c/p mirror size the cat down by 55% pull to lay on the bottom of her dress on the floor…
E55 c/p size it down by 55% pull to the right hand edge of the frame…
E12 c/p mirror rotate 45° to the left , size it down by 42% pull to sit on top of lamp…
E7 c/p size down by 42% pull to sit on left side of lamp…
E24 c/p size down by 44% pull to sit in front of blue box…
E52 c/p size down by 41% pull to the right of the cat…
E22 c/p size it down by 32% pull to sit on right of blue glass..
Click on bottom layer of your tag size the canvas down to 700x700 (you can also use the pixels to size down ) Do this how ever you feel comfortable …
Open paper 9 flood fill and apply mask from above, merge into one group layer , then go to the top most layer of your tag; add a new raster layer for the credit of the tube, and credit to kit maker , add a saying and your done…

Thank you for reading my tutorial
©LadyDragus~ January 2019