Have fun

I write tut's as a guide line to make tags. I'm in no way saying mine is the right way, just the way I make a tag.

There are many ways to do all tags. I am just sharing my view of making the tag's I make... If you have a better way of doing a certain step, then by all means use your way. After all it is your tag centered around my tut... I would appreciate an occasional comment telling me what you think of the Tag, Tut, Kit, ect... This way I know what everyone likes and can improve... Thanks for understanding...

Please do not add your name or other words to the snags I post on my blog


In Love and Darkness

LadyDragus

Nov 8, 2018

Autumn Spice


Autumn Spice


This tutorial is written in Corel X5, but any version should work, this is written in hopes you have  working knowledge of Paint Shop Pro or other graphics program… this is written by me, never meant to copy or look like your work…


I am using  a PTU kit
By Joyful Kreationz
 Called Autumn Margo



You can only find this kit at Scraps and Co.


I am using a PTU
Bonus Tube from 2016 **for bonus tubes you must buy $8.00 then request the one you want, if not you will get the current tube that is up at the store**
By Arthur Crowe


YOu can find all of the stores Bonus


Open a 725x725 tag (size down at the end)
Frame 5 c/p re-size it down by 75%
E43 c/p rotate 90° to the right, pull it to the far right hand edge of your frame…
E68 c/p pull to the left hand edge of your frame..
E19 c/p pull behind the frame, size it down by 40% apply these settings
Using MuRa’s Copies


Take the tube you are going to use, mind is a standing tube (Close up) Paste and I re-sized her down by 65% pulled to the middle of the frame; I also cleaned off any of the leg showing…
E72 c/p re-size down by 40% pull to sit on the left hand side of your tube…
E5 c/p re-size down by 60% pull to the far left hand edge of your tag, c/p mirror a 2nd one to the right hand edge of your tag..
E36 c/p flip vertical re-size it down by 60% pull to the right hand edge of your tag…
E53 c/p pull to the bottom hand edge of the tube/frame…
E54 c/p size down by 85% pull to the lower left edge of your tag…
E33 c/p re-size down by 27% pull to the far left hand edge of your tag…
E14 c/p mirror size down by 45% pull to the right hand edge of the tag…
E62 c/p leave it as it falls on the tag..
I do not think a paper is needed since you really wont see it around the leaves we put and trees on the tag…
Make a new raster layer for your copyright’s and credit to kit maker, make sure you have  LIC# to use this tube…

Thank you for reading my tutorial…
©LadyDragus~ November 2018

Tag for kit maker 



No comments:

Post a Comment

thank you for using my items, or tutorials